How To Fix Sweating Windows

Isn't it annoying on rainy, humid days when the glass windows of your house fog up? And not only is information technology abrasive to await at, only it's embarrassing when guests run across, too. Fortunately, there'southward a quick and easy fix, find out more beneath, here's how to ready foggy windows fast!

** Notation: When working on windows, there is a chance something goes incorrect and the window breaks. Be prepared for that to happen before beginning this DIY projection. **

How To Prepare Foggy Windows

To set foggy windows fast, you should drill two modest holes on the lower side of the glass pane closest to the exterior of the business firm. This will help ready foggy windows because the modest hole gives the fog (caused by moisture condensation) somewhere to easily evaporate, thusly, immigration your windows. Terminate things off past plugging the holes and resealing your windows to ensure the trouble doesn't render. Check out the step-by-step below.

Here'southward What You'll Need:

– A drill

-Caulk (to reseal your window frames)

-Caulking Gun

-1 Inch of Plastic Tubing (same size of the drill fleck)

-Clear silicone gum

Stride One

Before you starting time working, make certain the atmospheric condition is perfect! Extreme temperatures can put more stress on windows, causing them to shatter when working on them. Pick a cool, slightly cloudy day for best results. Make clean your windows, inside and out! To truly "know what you're working with," so to speak, you have to start with a clean surface.

Step Two

Now that's out of the manner, information technology'southward time to get to work. Kickoff, determine if the problem is contained to i window pane. Next, check for signs of rot. If yous should encounter any, it'southward all-time to merely call in a professional for assist fixing.

Step Three

Drill two small holes on the lower part of the outer window pane. Leave the window open like this for a few days, allowing all of the trapped wet to truly evaporate. But brand certain that pelting does Non get into your window or you will be immediately worse off than you started.

Step Four

After the wet has evaporated, you will want to plug the holes in your window frame. To do so, plug them with a i-inch piece of plastic tubing. Trim off the excess, and seal the hole with clear silicone glue. Next, use caulk in your desired color to reseal the window frame (scraping off the old caulk if need be). And you're done!